T-Model Spray Guns

T-Model guns come in two configurations — T70 and T75G — each suited to different project sizes and workflows.

• T-Model: Lightweight (20% lighter than standard HVLP guns) with ergonomic Stay-Cool handles, a side-mounted Fan Pattern Control, and excellent atomization for a professional finish.
• Compatibility: Works with all Fuji Spray HVLP turbines.

Choose Your Feed Style:

• Gravity-Feed (T75G): With the cup above the gun, gravity-feed models are perfect for smaller jobs and tight spaces. They offer better maneuverability and are easier to clean, making them a favorite for detailed work like cabinetry.
• Bottom-Feed (T70): Ideal for larger projects, these guns have the fluid cup beneath the gun, allowing for higher capacity (up to 1 quart). This setup is well-balanced and reduces the need for frequent refills, making it suitable for extensive spraying tasks.

Already have a T-Model gun and want to fine-tune your spray pattern? Browse T-Model air cap sets.

Dialing in the fan pattern. The T-Model’s patented pattern control sits on the side of the gun, where your fingers already are — no reaching around mid-pass. It runs continuously from a one-inch stripe to a fan roughly thirteen inches wide. Two habits make it sing: adjust the fluid control in tandem (a wide fan starves without more material; a narrow one floods and drips), and for fine detail, go narrow, ease the fluid back and move closer — the pattern tightens to a quarter inch with almost no overspray. Rotating the air cap flips the orientation: horizontal cap for a vertical fan, vertical cap for horizontal. Fuji’s five-minute walkthrough shows all of it.

Your T-Model gun ships with a 1.3 mm air cap set. Already have one and want to fine-tune your spray pattern for a different material or finish? Browse individual sizes below.

Each air cap set includes a fluid nozzle, needle, and air cap. The nozzle and needle must be the same size — together they meter how much material reaches the air stream — while the air cap can go one size up or down from that pairing to fine-tune atomization. Size by what you spray, not by the gun: thin materials like dyes, stains, and clear lacquers want a smaller nozzle; heavy latex, primers, and filled coatings want a larger one.

Fuji’s Air Cap Quick Reference Sheet (PDF) maps every size against the materials it suits.

• 0.8 mm: Ideal for ultra-fine applications such as inks, dyes, and touch-up work. Best suited for artists and highly detailed projects.
• 1.0 mm: Perfect for fine finishing tasks, including water-based lacquers, sealers, and stains. This is a versatile choice for most clear finishes.
• 1.3 mm: Offers a slightly higher output, making it suitable for automotive enamels, catalyzed lacquers, and latex paints on cabinetry and trim.
• 1.5 mm: Provides medium output, ideal for spraying walls, ceilings, and larger surfaces with materials like primers and oil-based paints.
• 1.8 mm: Designed for high output applications, including thick coatings like epoxy, adhesives, and multi-fleck paints.
• 2.0 mm and 2.5 mm: These sizes are for very high output needs, suitable for industrial primers, texture coatings, and heavy latex applications on large surfaces.

Need spare parts, seals, or accessories for your T-Model gun? Visit our T-Model Parts page.