Ships from Fuji Spray. Allow a few extra business days.
The Fuji Spray MPX-30 is the mid-pressure gun in the X Series — built for professional finishing with the rapid application speed of high-pressure equipment and the efficiency of HVLP. Side-mounted fan pattern control gives precise, reduced-overspray adjustment up to a 330 mm (13") fan, and 100% stainless steel fluid passages handle waterborne and solvent-based coatings from thin dyes to heavy-bodied paints. At 503 g it is light in the hand, with the familiar controls of a conventional gun and less thinning than a fine-finish HVLP.
It ships with the 1.7 mm air cap set installed, with five sizes from 1.0 mm to 2.0 mm available to match the material. Fuji's kit also includes the 1.4 mm set and an inlet pressure regulator with gauge.
The siphon-feed MPX-30 draws from a cup below the gun — the 1 qt aluminum cup carries more material for larger jobs. It is available with no cup or with the 1 qt aluminum cup. Choose the configuration above.
Key Features
Compatible Air Cap Sets
This gun also takes:
What's in the Box
Consumables
| Gun Type | Mid-Pressure |
| Feed Type | Siphon Feed |
| Standard Air Cap Set | 1.7 mm |
| Air Source | Compressor |
| Application Type | General purpose — woodworking to automotive |
| Available Air Cap Sets | 1.0, 1.3, 1.4, 1.7, 2.0 mm |
| Air Supply Pressure | 36 PSI at gun inlet (2.5 bar) |
| Air Consumption | 13.8 CFM (390 L/min) |
| Maximum Fan Width | 330 mm (13 in) |
| Air Inlet Size | 1/4" BSP and NPS |
| Air Supply Hose | 5/16" ID |
| Fluid Passages | Stainless steel |
| Gun Weight (Without Cup) | 503 g (17.7 oz) |
| Compliance | VOC compliant |
| Fluid Coupler | 3/8" x 19P |
Country of Origin
Designed and assembled in Canada.
